Picture this: the power goes out mid-dinner service at your Scottsdale restaurant, mid-procedure at your North Scottsdale dental office, or at 2 a.m. in a home where your family is asleep upstairs. In that moment, Emergency & Exit Lighting Installation is not a code checkbox — it is the difference between a safe, controlled evacuation and a panicked scramble in the dark. At FHR Electric, we install, replace, and certify emergency and exit lighting systems for commercial businesses, medical and dental offices, restaurants, retail spaces, and residential properties across Maricopa County — and we do it to the letter of NFPA 101, IBC, and Arizona state electrical code so you never have to wonder whether you’ll pass your next inspection.
If you have been burned by an unlicensed sub who left you with a failed inspection, shoddy wiring, or lighting fixtures that simply did not work when the inspector tested them, you already know how costly cutting corners can be. Our licensed electricians do not guess. We measure, document, and test every circuit, every battery backup, and every fixture placement before we close the job — and we hand you the paperwork to prove it.
Why Emergency & Exit Lighting Is Not Optional — For Anyone
Most people think of emergency and exit lighting as a commercial requirement only. The truth is more nuanced — and the stakes are higher than most homeowners and business owners realize. For commercial properties, code compliance is mandatory: emergency and exit lighting standards are rooted in life-safety law, and a failed inspection or a non-functional system during an actual emergency can expose you to serious liability — or worse. For homeowners undertaking high-end remodels, adding a media room or finished basement, or simply upgrading a property they intend to sell in Scottsdale’s competitive market, properly installed emergency lighting and egress illumination is a detail that separates a professionally finished project from one that raises red flags at closing.
At FHR Electric, we serve homeowners and business owners across Scottsdale, Phoenix, North Phoenix, Chandler, Gilbert, Mesa, Tempe, Glendale, Fountain Hills, and throughout Maricopa County. Whether you manage a single retail suite, a multi-tenant medical building, a restaurant with tight uptime requirements, or a custom home where commercial power reliability matters as much as aesthetics, we have the licensing, the experience, and the code knowledge to get the job done right — the first time.
Our Emergency & Exit Lighting Services
We cover the full scope of Emergency & Exit Lighting Installation — from new construction rough-in through retrofit, testing, and certification. Here is what we install and service:
Emergency Lighting Installation (New & Retrofit)
- Battery-backup emergency light heads — self-contained units that automatically illuminate when the power fails, keeping corridors, stairwells, and egress paths visible for the required minimum duration.
- Central battery emergency systems — ideal for larger commercial properties, medical suites, and restaurants where a centralized power source feeds multiple lighting zones simultaneously.
- LED conversion and upgrade — older incandescent or fluorescent emergency fixtures eat battery reserves fast. We replace them with energy-efficient LED emergency heads that extend runtime and reduce long-term maintenance.
- Hardwired emergency circuit integration — we connect your emergency lighting to a dedicated circuit properly sized for the load, with appropriate overcurrent protection and code-compliant wiring.
Exit Sign Installation & Replacement
- Illuminated exit signs — hardwired, battery-backed, and LED for maximum reliability and minimal energy draw. We handle standard single-face and double-face units, as well as edge-lit and custom low-profile options for high-end interiors.
- Photoluminescent (glow-in-the-dark) exit path markers — a cost-effective complement to hardwired systems for stairwells, parking garages, and secondary egress paths.
- Exit sign repositioning and addition — if your layout has changed due to a tenant improvement, renovation, or occupancy change, we evaluate your egress plan and add or relocate signs to bring you back into compliance.
Testing, Inspection & Certification
- Annual and monthly testing — NFPA 101 requires monthly 30-second tests and annual 90-minute discharge tests. We perform both and provide written documentation you can show your insurance carrier, fire marshal, or building inspector.
- Battery replacement and load testing — a battery that passes a visual check can still fail under real load. We perform proper load tests and replace batteries proactively before they fail you during an actual power outage.
- Code correction and permit closeout — if you have an open permit, a failed inspection, or an aging system that never met current code, we diagnose the gaps and correct them. Our team handles electrical troubleshooting and code correction across all property types.
Specialty & Commercial Applications
- Restaurant and food service — kitchens, dining rooms, and service corridors all have specific egress lighting requirements. Combined with your restaurant electrical services needs, we ensure your entire facility is safe, compliant, and built for zero-downtime operation.
- Medical and dental offices — your patients and staff deserve an environment where every safety system is verified and documented. We work alongside our medical and dental office electrical services to integrate emergency lighting into your full electrical buildout.
- New commercial construction — rough-in, fixture placement, circuit design, and final connection for emergency and exit lighting in new builds coordinated with your GC from day one.
- Tenant improvements and office build-outs — changing your suite layout? Emergency egress plans must be updated to match. We handle the electrical side so your permit closes clean.
“The inspector showed up unannounced, tested every single exit sign and emergency light in the building — and every one of them worked perfectly. FHR Electric installed them six months earlier and documented every circuit. We passed without a single correction item. That kind of peace of mind is worth every dollar.”
— Property Manager, Old Town Scottsdale Commercial Building
Why This Matters More in Arizona Than Almost Anywhere Else
Arizona summers are brutal on electrical systems. Sustained heat accelerates battery degradation in emergency lighting units — a battery that would last four years in a mild climate may fail in two in a Scottsdale or Chandler commercial space. Electrical failures in high-temperature Arizona conditions are a real risk, and emergency lighting systems are particularly vulnerable because their batteries sit on trickle charge for months or years between real-world demands. When the grid drops during a monsoon storm or a summer peak-demand brownout, that is not the moment to discover your backup lighting batteries have been cooking themselves into failure.
Our team installs units rated for high-ambient-temperature environments and schedules proactive battery replacement cycles calibrated to Arizona’s climate — not a generic national maintenance schedule that was never designed for 115-degree attic conditions.
How We Work: Our Process From Call to Certification
We believe transparency earns trust. Here is exactly what happens when you call FHR Electric for Emergency & Exit Lighting Installation:
- Site walk and code review. We visit your property, review your floor plan and current egress paths, and identify every location where emergency lighting or exit signage is required under NFPA 101, IBC, and Arizona state code. We also check for any existing open permits or outstanding code corrections that need to be resolved before new work begins.
- Detailed written scope and transparent pricing. You receive a written proposal — not a ballpark — before any work starts. We explain every line item so there are no surprise invoices when the job is done. No scope creep without your sign-off, period.
- Permit pull and inspection coordination. We pull the required permits, schedule inspections, and coordinate directly with the AHJ (Authority Having Jurisdiction) so you never have to chase a permit or worry about closing an open item before a property sale.
- Licensed installation by our own crew. No subcontracting to unvetted labor. Every electrician on our crew is licensed, background-checked, and experienced with commercial life-safety systems. Our licensing is verifiable — we welcome electrician license verification in Arizona before you hire us.
- Load testing and documentation package. Before we close the job, every battery backup is load-tested, every fixture is verified, and every circuit is documented. You receive a complete certification package — including test results, fixture locations, circuit assignments, and maintenance schedule — that satisfies insurance, fire marshal, and building inspector requirements.
- Ongoing maintenance available. We offer scheduled annual and monthly testing programs so you are never scrambling to find documentation before an inspection.
The Properties We Serve Across Maricopa County
We install and service emergency and exit lighting systems for a wide range of property types across Scottsdale, Phoenix, North Phoenix, Chandler, Gilbert, Mesa, Tempe, Glendale, Fountain Hills, and all of Maricopa County:
- Restaurants and food service operations — where a power outage mid-service is not just an inconvenience but a liability event
- Medical and dental offices — where patient safety and regulatory compliance are non-negotiable
- Retail suites, boutiques, and salons — where a clean, professional interior demands low-profile, aesthetically integrated emergency fixtures
- Office build-outs and tenant improvements — where layout changes must trigger an updated egress lighting plan
- Warehouses, light industrial, and high-bay spaces — where long throw distances require proper emergency illumination planning
- New commercial construction — where emergency lighting rough-in must be coordinated with the GC from the framing stage
- High-end residential remodels — where safety, resale value, and permit compliance all intersect
If your property type is not listed here, call us anyway. If it has electrical and people inside it, we can help.
One Licensed Team for Every Electrical Need
One of the biggest pain points our clients describe is managing multiple contractors — an electrician for the panel, a different guy for lighting, someone else for the EV charger — and ending up with nobody who owns the whole picture. At FHR Electric, we are that one team. From emergency and exit lighting through full security lighting installation and beyond, we handle the complete electrical scope for your home or business. That means consistent quality, single-point accountability, and a relationship with a licensed team that knows your property from top to bottom.
Whether you need a single exit sign replaced, a full facility brought up to NFPA 101 compliance, or emergency lighting integrated into a new commercial buildout, FHR Electric is the call to make — and the only call you need to make.
Ready to Get Your Emergency Lighting Done Right?
Stop wondering whether your emergency and exit lighting will work when it matters most. Call FHR Electric today and let our licensed team inspect, install, test, and certify your system — so the next time your power goes out, everyone in your building knows exactly where to go.
Serving Scottsdale, Old Town Scottsdale, North Scottsdale, Phoenix, North Phoenix, Chandler, Gilbert, Mesa, Tempe, Glendale, Fountain Hills, and all of Maricopa County, AZ. Licensed, insured, and permit-ready.